8-Pin Optional Power Connector
Main Index
Mech Specs
ooPIC-R
The Optional I/O power connection provides the following connections.
Primary Power In.
Regulated Primary Power Out.
Secondary (Servo) Power In.
Ground.
The connector is a 8-pin, .100 inch spacing connector.
The following table show the pin assignments for the 8-pin Optional I/O Power Connector.
Pin
Name
Dir
Description
Function
1
GND
Ground
0 Volt reference
2
GND
Ground
0 Volt reference
3
+5
Regulated main +5 Volt power.
Taps onto the output of the 5-Amp 5-Volt power regulator.
4
GND
Ground
0 Volt reference
5
+SP
Power in for servos
Provides an input voltage to the Optional Voltage Regulator and the Power Jumpers.
6
GND
Ground
0 Volt reference
7
+MP
Main power in
Provides the ooPIC with an unregulated power source of +6 to +15 Volts.
8
+MP
Main power in
Provides the ooPIC with an unregulated power source of +6 to +15 Volts.
ooPIC Compiler Ver 6.0 (c) Copyright 1997 - 2007 Savage Innovations, LLC.
