ooPIC Logo

8-Pin Dual H-Bridge Connector

Main Index
Mech Specs
ooPIC-R
The Dual DC Motor H-Bridge connector provides the following connections.
  • 2 PWM Lines.
  • 4 Digital I/O Lines
  • +5 Volt Power & Ground.
  • Can be optionally used for I/O and functions other than Dual H-Bridge.

The connector is an 8-pin, .100 inch spacing, connector.
The following table show the pin assignments for the 8-pin Dual DC Motor H-Bridge connector.
PinNameDirDescriptionFunction
1GND---Ground0 Volt reference
2Channel-A - Control-1I/O Line 241st control line for H-Bridge.  
3Channel-A - PWMI/O Line 17PWM speed control for H-Bridge.
4Channel-A - Control-2I/O Line 252ndt control line for H-Bridge.
5Channel-B - Control-1I/O Line 261st control line for H-Bridge.
6Channel-B - SCLI/O Line 18PWM speed control for H-Bridge.
7Channel-B - Control-2I/O Line 272ndt control line for H-Bridge.
8+5+5 Volt power.+5 Volt reference
 

ooPIC Compiler Ver 6.0 (c) Copyright 1997 - 2007 Savage Innovations, LLC.